Pad detected as keyboard / not as LTEK Pad
Pad detected as keyboard instead of dance pad
1. Why is my mat not detected in StepMania? As a controller in the system?
If your mat displays LEDs on its casing after connecting it to your computer, your mat may be set to a profile that is not detectable by the Stepmania game.
When the mat is connected and displays the “orange 1” profile ( center LED is brighter than the rest), it means that the mat is set to keyboard mode (which may not be detectable as a controller, which is why it does not appear in Stepmania). For the game to automatically detect and map the mat as an LTEK controller, follow this guide.
2. Next Level Gaming Mat profiles
Next Level Gaming Mat comes with a manual containing all available profiles, please refer to the included manual for a complete list of control profiles or go to "Manuals & Setup" to view the manual online.
Note that the standard Stepmania configuration is marked as 'White 1'. Proceed with the following steps to activate your preferred profile.
3. Connect your Dance Pad
Connect your pad to designeted device
4. Stand on Right and left arrow
stand or kneel on two arrows as seen below (left and right arrows)
5. Cover the Start / Select Sensors
Cover sensors with both of your hands until all LEDs blinks white
6. Uncover the sensors
Uncover both sensors when all 5 LEDs blink white, you will see the last used profile will blink.
DO NOT STEP OFF THE LEFT AND RIGHT ARROW
7. Change the profiles
Swinging above left or right sensor will change the profile accordingly, to see all available profiles see the next level gaming mat manual.
8. profile confirmation
When you are on the target profile you have selected, confirm and select the profile by pressing/releasing the arrows. You will then see flashing green LEDs, which means that the selected profile has been confirmed.
